SLOG Online Archive 5

• ESL Direct Drive Amplifiers......? - Bob Ratner 18:05:16 11/08/03 (26)
  • Re: ESL Direct Drive Amplifiers......? - Brian Walsh 09:33:55 11/09/03 (25)
    • Re: Re: ESL Direct Drive Amplifiers......? - CV 04:34:12 11/11/03 (24)
      • Has anyone considered an OTL design? - Bill Lamb 21:39:53 11/13/03 (2)
        • Yes, Harold Beveridge. (url) - Al Sekela 12:16:59 11/14/03 (1)
          • Re: Yes, Harold Beveridge. - Brian Walsh 13:41:17 11/14/03 (0)
      • Re: Re: Re: ESL Direct Drive Amplifiers......? Acoustat - Bob Ratner 09:23:31 11/11/03 (20)
        • Re: Re: Re: Re: ESL Direct Drive Amplifiers......? Acoustat - Brian Walsh 09:58:12 11/11/03 (19)
          • Re: Re: Re: Re: Re: ESL Direct Drive Amplifiers......? Acoustat - CV 04:26:40 11/12/03 (18)
            • Real World ESL Direct Drive Amplifiers......? Acoustat - Bob Ratner 08:09:18 11/12/03 (17)
              • Re: Real World ESL Direct Drive Amplifiers......? Acoustat - CV 08:28:16 11/12/03 (16)
                • Re: Re: Real World ESL Direct Drive Amplifiers......? Acoustat - Bob Ratner 10:50:32 11/12/03 (15)
                  • Re: Re: Re: Real World ESL Direct Drive Amplifiers......? Acoustat - CV 12:23:21 11/12/03 (14)
                    • Re: Re: Re: Re: Real World ESL Direct Drive Amplifiers... - Brian Walsh 22:54:58 11/12/03 (1)
                      • Re: Re: Re: Re: Re: Real World ESL Direct Drive Amplifier - Brian Walsh 22:56:46 11/12/03 (0)
                    • Real World ESL D D Amplifiers....? Acoustat 5Kv @ 1 Amp - Bob Ratner 15:34:27 11/12/03 (0)
                    • Re: Re: Re: Re: Real World ESL Direct Drive Amplifiers... - Brian Walsh 13:22:27 11/12/03 (10)
                      • Real World ESL Direct Drive Amplifiers...Tube Manuals - Bob Ratner 21:12:47 11/12/03 (9)
                        • Acoustat sound -Yup! Best of the rest, eh? (nt) - goldenthal 11:31:41 11/14/03 (0)
                        • Re: Real World ESL Direct Drive Amplifiers...Tube Manuals - Brian Walsh 22:47:49 11/12/03 (7)
                          • Re: Re: Real World ESL Direct Drive Amplifiers...Tube Manuals - Bob Ratner 23:17:33 11/12/03 (6)
                            • Re: Re: Re: Real World ESL Direct Drive Amplifiers...Tube - Brian Walsh 06:25:45 11/13/03 (0)
                            • Less bias on older panels - Roy 01:02:37 11/13/03 (4)
                              • Re: Correction - Roy 03:01:38 11/14/03 (0)
                              • Re: Less bias on older panels..More Bias...Higher Drive AC - Bob Ratner 08:47:06 11/13/03 (2)
                                • Re: Re: Less bias on older panels..More Bias...Higher Drive AC - Roy 10:58:46 11/13/03 (1)
                                  • Re: Less bias on older panels..More Bias...Higher Drive AC - Bob Ratner 17:38:53 11/13/03 (0)
• Room Treatment Products (url) - Roy 06:16:47 11/05/03 (1)
  • Re: Room Treatment Products (url) - Kevin 18:45:49 11/08/03 (0)
• Is it possible? - Johnson 01:25:10 11/02/03 (24)
  • Re: Is it possible? - Steven Evanson 11:52:12 11/09/03 (1)
    • Re: Re: Is it possible? - Travis 15:28:15 11/09/03 (0)
  • Re: Is it possible? - Lew 07:17:10 11/03/03 (20)
    • Re: Re: Is it possible? - Johnson 08:26:09 11/03/03 (9)
      • Something to check - Al Sekela 09:46:04 11/04/03 (0)
      • problem - Lew 09:05:42 11/03/03 (7)
        • Re: problem - Johnson 07:34:31 11/04/03 (3)
          • Re: Re: problem - Lew 13:01:35 11/04/03 (2)
            • Re: Re: Re: problem - Johnson 22:56:37 11/04/03 (1)
              • Re: Re: Re: Re: problem - Lew 07:17:06 11/05/03 (0)
        • Well, since the 700cx is the current top of the FPB line... - David S. 16:16:50 11/03/03 (2)
          • Re: Well, since the 700cx is the current top of the FPB line... - Lew 07:20:47 11/04/03 (1)
            • Re: Re: Well, since the 700cx is the current top of the FPB line... - Mark Allen 20:40:17 11/24/03 (0)
    • Re: Re: Is it possible? - Al Sekela 07:47:01 11/03/03 (9)
      • Re: Re: Re: Is it possible? - Lew 12:54:43 11/04/03 (3)
        • Likely causes - Al Sekela 15:32:12 11/05/03 (2)
          • Sorry, this particular test would not work - Al Sekela 19:15:23 11/06/03 (0)
          • Re: I think I may have it - Roy 16:57:10 11/05/03 (0)
      • Re: Re: Re: Is it possible? - Brian Walsh 08:19:28 11/03/03 (4)
        • Re: Re: Re: Re: Is it possible? - TuuuuuK 07:29:15 11/04/03 (3)
          • Re: Re: Re: Re: Re: Is it possible? - Brian Walsh 08:05:41 11/04/03 (2)
            • Re: Re: Re: Re: Re: Re: Is it possible? - TuuuuuK 22:38:30 11/04/03 (1)
              • Re: Re: Re: Re: Re: Re: Re: Is it possible? - Brian Walsh 23:48:25 11/04/03 (0)
  • Re: Is it possible? - Brian Walsh 06:00:01 11/02/03 (0)
• New Panel Question - Harry Hasbun 18:59:46 10/29/03 (2)
  • Re: New Panel Question - Brian Walsh 19:07:06 10/29/03 (1)
    • Good news. - Wamajama 16:03:56 10/30/03 (0)
• Pristine III+ - andre 10:41:23 10/29/03 (5)
  • Re: Pristine III+ / same problem - Andre 10:25:27 11/14/03 (2)
    • Check Phase - KIS 19:16:39 11/14/03 (0)
    • Pristine III+ / same problem: Back & Side Wall Reflections? - Bob Ratner 10:46:29 11/14/03 (0)
  • Re: Pristine III+ - alf h 04:08:35 11/02/03 (0)
  • Re: Pristine III+ - Brian Walsh 13:37:45 10/29/03 (0)
• Innersound Amp and SL's - Steven Evanson 07:59:34 10/29/03 (3)
  • Repeat Travis' comment - Al Sekela 11:08:40 11/01/03 (2)
    • Edge - mariano 05:45:00 11/17/03 (1)
      • Re: Edge - Al Sekela 18:19:15 11/17/03 (0)
• Biased opinions and improvements - Roy 13:51:35 10/28/03 (10)
  • I posted the question... - Lew 11:33:42 10/30/03 (1)
    • nada - Lew 12:17:38 10/31/03 (0)
  • Re: Biased opinions and improvements - Matt Rogers 00:04:10 10/29/03 (1)
    • Re: Re: Biased opinions and improvements - Roy 02:39:08 10/29/03 (0)
  • Re: Biased opinions and improvements - Lew 14:25:59 10/28/03 (5)
    • Re: Re: Biased opinions and improvements - kelley pace 00:58:03 10/29/03 (4)
      • Kelly, you da man! - Lew 07:37:27 10/29/03 (0)
      • Circuit design - Roy 03:01:45 10/29/03 (2)
        • Re: Circuit design - kelley pace 13:08:53 10/29/03 (1)
          • Re: Re: Circuit design (quick fix) - Roy 12:40:52 10/31/03 (0)
• U-1 Bass response - seadogs1 12:04:25 10/28/03 (2)
  • Re: U-1 Bass response - Brian Walsh 12:50:11 10/28/03 (1)
    • Re: Re: U-1 Bass response - seadogs1 10:33:22 10/29/03 (0)
• Caddock MP9100 TO-247 - where to..../ Group Buy? - Matt Rogers 22:22:16 10/27/03 (3)
  • Re: Caddock MP9100 TO-247 - where to..../ Group Buy? - rcrump 22:01:18 11/09/03 (1)
    • Good to hear from you Bob... - Matt Rogers 08:35:05 11/10/03 (0)
  • Re: Caddock MP9100 TO-247 - where to..../ Group Buy? - Mike Beck 11:26:14 10/28/03 (0)
• SoundLabs: Are they prone to problems? - Steven Evanson 13:07:03 10/26/03 (18)
  • Re: SoundLabs: Are they prone to problems? - jame 09:15:24 11/03/03 (2)
    • A good combination - Al Sekela 09:53:11 11/04/03 (1)
      • Re: A good combination - jame 22:43:20 11/04/03 (0)
  • Re: SoundLabs: Are they prone to problems? - Tim Thomas 20:19:35 10/26/03 (0)
  • Re: SoundLabs: Are they prone to problems? - Travis 18:58:52 10/26/03 (0)
  • Re: SoundLabs: Are they prone to problems? - marcos augusto 18:19:51 10/26/03 (12)
    • Great post Marcos. Experience is so important with SL - Matt Rogers 23:32:55 10/27/03 (10)
      • Re: Great post Marcos. Experience is so important with SL - marcos augusto 00:21:18 10/28/03 (9)
        • Thanks, and it sounds like SL's are delicate and finicky. - Steven Evanson 07:52:09 10/28/03 (8)
          • Don't go overboard with your comments..... - Matt Rogers 10:05:32 10/28/03 (1)
            • Re: Don't go overboard with your comments..... - Steven Evanson 12:31:00 10/28/03 (0)
          • SL vs Acoustat - Lew 08:17:38 10/28/03 (0)
          • Re: Thanks, and it sounds like SL's are delicate and finicky - Brian Walsh 08:10:31 10/28/03 (4)
            • Delicate and Finicky - Roy 09:23:52 10/28/03 (3)
              • Re: Delicate and Finicky - Matt Rogers 10:21:54 10/28/03 (0)
              • Re: Delicate and Finicky - Brian Walsh 09:41:13 10/28/03 (1)
                • Re: Re: Delicate and Finicky - Roy 10:52:56 10/28/03 (0)
    • Re: Re: SoundLabs: Are they prone to problems? - Steven Evanson 08:26:03 10/27/03 (0)
• Symposium Platforms Under M1's - Mike Bieda 18:03:35 10/25/03 (1)
  • Re: Keep with Concrete - Roy 13:28:36 10/26/03 (0)
• Home made resistors MKII (pic) - Roy 12:59:58 10/22/03 (15)
  • Re: Home made resistors MKII (url) - kelley pace 09:48:15 10/23/03 (14)
    • Wow! - Lew 11:32:56 10/23/03 (13)
      • Re:Opinion - Roy 14:05:17 10/23/03 (12)
        • Re: Re:Opinion - Lew 15:04:38 10/23/03 (11)
          • One more thing... - Lew 15:08:31 10/23/03 (10)
            • Re: This is how I decided - Roy 16:26:17 10/23/03 (9)
              • Oops! We're not that far apart.. - Lew 07:28:41 10/24/03 (0)
              • Base on your guesstimate.... - Matt Rogers 18:45:42 10/23/03 (7)
                • Best calculations are ......... (pic) - Roy 05:12:13 10/24/03 (6)
                  • Oops, small calculation error - Roy 04:10:48 11/02/03 (0)
                  • Resistor Choices / SLOG a bit disappointing - Matt Rogers 06:51:11 10/24/03 (4)
                    • Re: Resistor Choices / SLOG a bit disappointing - Mike 14:34:16 10/24/03 (0)
                    • Re: Resistor Choices / SLOG a bit disappointing - kelley pace 13:47:13 10/24/03 (0)
                    • (speechless) - Lew 07:54:13 10/24/03 (1)
                      • Re: (speechless) - Travis 16:23:24 10/24/03 (0)
• Home made resistors (pic) - Roy 10:47:30 10/20/03 (15)
  • Re: Home made resistors - Matt Rogers 09:09:15 10/21/03 (1)
    • Re: Re: Home made resistors - Roy 10:49:15 10/21/03 (0)
  • Re: Home made resistors (url) - kelley pace 14:58:26 10/20/03 (6)
    • Re: Re: Home made resistors - Matt Rogers 15:44:23 10/21/03 (2)
      • Re: Re: Re: Home made resistors - kelley pace 08:40:06 10/22/03 (1)
        • Mills Resistors - Matt Rogers 09:58:43 10/22/03 (0)
    • Re: Re: Home made resistors - Lew 10:21:25 10/21/03 (2)
      • Re: Re: Re: Home made resistors - kelley pace 09:49:47 10/22/03 (1)
        • Current - Lew 10:55:25 10/22/03 (0)
  • Re: Home made resistors - Lew 11:16:34 10/20/03 (3)
    • Re: Re: Home made resistors - Roy 12:57:41 10/20/03 (2)
      • Vishay non-inductive wirewounds - Lew 13:27:46 10/20/03 (1)
        • Re: Vishay Links (url) - Roy 15:18:44 10/20/03 (0)
  • Great post.... - Matt Rogers 11:06:51 10/20/03 (1)
    • Re: Great post.... - Roy 13:09:38 10/20/03 (0)
• Re: X-over - R value and HF transformer saturation (longish) - Matt Rogers 02:09:56 10/20/03 (7)
  • Re: Re: X-over - R value and HF transformer saturation (longish) - Roy 10:54:04 10/20/03 (1)
    • Yes. Have considered Toroid... - Matt Rogers 11:27:22 10/20/03 (0)
  • Effect on x-over point - Lew 08:10:54 10/20/03 (4)
    • Oops - calculation error... - Matt Rogers 10:30:46 10/20/03 (2)
      • Results I get... - Lew 11:31:05 10/20/03 (1)
        • Re: Results I get... - Matt Rogers 11:56:14 10/20/03 (0)
    • Re: Effect on x-over point - Matt Rogers 09:19:40 10/20/03 (0)
• M-3 inefficiency is a major problem - Steven Evanson 19:26:08 10/16/03 (36)
  • I also own a pair of M3's and...... - Simon Templar 23:56:15 10/21/03 (0)
  • i thought it was too - rhyno 18:31:13 10/20/03 (0)
  • Re: M-3 inefficiency is a major problem - Yves 06:21:33 10/18/03 (0)
  • efficiency - Lew 13:41:13 10/17/03 (16)
    • Re: efficiency - Steven Evanson 07:48:58 10/18/03 (15)
      • Re: Re: efficiency - Travis 08:01:34 10/18/03 (14)
        • Re: Re: Re: efficiency - Steven Evanson 16:33:53 10/18/03 (13)
          • Re: Re: Re: Re: efficiency - Travis 17:19:22 10/18/03 (12)
            • Re: Re: Re: Re: Re: efficiency of your? - Bob Ratner 22:48:27 10/18/03 (11)
              • Re: Re: Re: Re: Re: Re: efficiency of your? - Travis 18:21:27 10/19/03 (5)
                • Re: Re: Re: efficiency of your? Magneplaner - Bob Ratner 18:37:44 10/19/03 (4)
                  • Re: Re: Re: Re: efficiency of your? Magneplaner - Travis 16:34:25 10/20/03 (3)
                    • Home Theater? A bad Multi Billion $ joke on kids - Bob Ratner 16:46:56 10/20/03 (2)
                      • Re: Home Theater? A bad Multi Billion $ joke on kids - Travis 18:49:23 10/21/03 (1)
                        • Re: Re: Home Theater? Classic Movie Mono - Bob Ratner 19:42:21 10/21/03 (0)
              • Re: Re: Re: Re: Re: Re: efficiency of your? - marcos augusto 03:13:07 10/19/03 (4)
                • Re: Re: Re: Re: Re: Re: Re: efficiency of your? - evanson 17:43:17 10/22/03 (2)
                  • Re: Re: Re: Re: Re: Re: Re: Re: efficiency of your? - Travis 16:11:37 10/23/03 (1)
                    • Re: Re: Re: Re: Re: Re: Re: Re: Re: efficiency of your? - Steven Evanson 17:09:46 10/23/03 (0)
                • InnerSound amplifier tweaks - Al Sekela 09:44:06 10/19/03 (0)
  • You need to decide to keep the amp or the speaker - Kenny 09:07:55 10/17/03 (2)
    • Question on preamp - Matt Rogers 09:19:21 10/17/03 (1)
      • Re: Question on preamp - Travis 16:16:20 10/17/03 (0)
  • Amp matching really is critical - Duke 09:02:08 10/17/03 (4)
    • Re: Amp matching really is critical (url) (pic) - Rick 00:00:46 10/19/03 (0)
    • Re: Amp matching really is critical - Steven Evanson 11:43:47 10/17/03 (1)
      • Re: Amp matching really is critical - Duke 14:14:10 10/17/03 (0)
    • Corollary to this - Brian Walsh 09:34:36 10/17/03 (0)
  • Re: M-3 inefficiency is a major problem,but..... - Bob Ratner 04:47:32 10/17/03 (0)
  • Re: M-3 inefficiency is a major problem ,but ........ - Bob Ratner 21:24:30 10/16/03 (0)
  • Re: M-3 inefficiency is a major problem - Tim Thomas 21:15:51 10/16/03 (3)
    • Re: Re: M-3 inefficiency is a major problem - Bob Ratner 21:29:31 10/16/03 (2)
      • Re: Re: Re: M-3 inefficiency is a major problem - Steven Evanson 08:03:07 10/17/03 (1)
        • M-3 inefficiency is a major problem.... Mac-Settings...? - Bob Ratner 18:03:20 10/17/03 (0)
  • Re: M-3 inefficiency is a major problem - Matt Rogers 19:41:07 10/16/03 (1)
    • Re: Re: M-3 inefficiency is a major problem - Steven Evanson 08:07:04 10/17/03 (0)
• Is it OK to replace the fuse with a brass bar ? - Kenny 08:32:50 10/16/03 (2)
  • Re: Is it OK to replace the fuse with a brass band ? - Bob Ratner 16:40:16 10/16/03 (0)
  • Yes and No. - Matt Rogers 15:37:14 10/16/03 (0)
• Acoustat Ampilifier : A Full-Range ESL Drive - Bob Ratner 01:10:21 10/16/03 (0)
• My new M-3's: comments and questions - Steven Evanson 16:46:39 10/15/03 (1)
  • Re: My new M-3's: comments and questions - Brian Walsh 18:02:54 10/15/03 (0)
• The big boy’s are in (pic) - Roy 16:02:05 10/14/03 (2)
  • Looks good - love your attention to detail - Matt Rogers 16:22:23 10/14/03 (1)
    • Re: Looks good - love your attention to detail - Roy 16:33:20 10/14/03 (0)
• Another resistor inquiry - Al Sekela 15:49:03 10/14/03 (17)
  • Re: Another resistor inquiry - Roy 16:14:42 10/14/03 (16)
    • Here we go... - Al Sekela 08:30:13 10/15/03 (15)
      • Re: ... and a tough one it is too - Roy 13:30:43 10/15/03 (12)
        • Out of the path - Al Sekela 14:53:45 10/15/03 (11)
          • Re: Non magnetic V magnetic - Roy 15:27:14 10/16/03 (10)
            • Re: Re: Non magnetic V magnetic - Lew 11:00:02 10/17/03 (4)
              • Re: Re: Re: Summary - Roy 15:00:38 10/17/03 (3)
                • Resistor lore (url) - Al Sekela 15:45:05 10/17/03 (2)
                  • Re: Resistor lore - Matt Rogers 16:52:29 10/17/03 (1)
                    • Re: Re: Resistor lore - Roy 13:58:54 10/18/03 (0)
            • I am glad that you have taken this resistor mod... - Matt Rogers 15:48:50 10/16/03 (3)
              • Re: Maybe remake the 10ohm - Roy 16:09:11 10/16/03 (2)
                • Re: Re: New Resistors - Roy 08:01:13 10/17/03 (0)
                • Before you go further - Matt Rogers 16:33:16 10/16/03 (0)
            • I am glad that you have taken this resistor mod... - Matt Rogers 15:47:52 10/16/03 (0)
      • Magnetic leads - Matt Rogers 11:28:27 10/15/03 (1)
        • Re: Enthusiasm - Roy 13:40:51 10/15/03 (0)
• I am going to make Direct Drive a reality for SL Owners... - Matt Rogers 10:25:59 10/14/03 (16)
  • Re: I am going to make Direct Drive a reality for SL Owners... - Art Tedeschi 17:43:39 10/14/03 (3)
    • I need more info from you Art.... - Matt Rogers 18:50:26 10/14/03 (2)
      • Re: I need more info from you Art.... - Art Tedeschi 06:30:46 10/15/03 (0)
      • info from you Art.... DD: CONSTANT OUTPUT IMPEDANCE - Bob Ratner 21:30:06 10/14/03 (0)
  • Some answers to your questions.. - Lew 13:50:29 10/14/03 (9)
    • Thanks Lew - Matt Rogers 14:03:39 10/14/03 (8)
      • No mixer - Lew 16:45:04 10/14/03 (7)
        • Re: No mixer - Matt Rogers 17:05:45 10/14/03 (6)
          • No stinkin' cross-over and mixer. - Lew 14:42:12 10/15/03 (4)
            • Re: No stinkin' cross-over and mixer. - Matt Rogers 17:11:19 10/15/03 (2)
              • webmaster - Lew 15:23:17 10/16/03 (0)
              • Re: No stinkin' cross-over and mixer. In the Acoustat Amp - Bob Ratner 19:53:00 10/15/03 (0)
            • Re: No stinkin' cross-over and mixer. - Bob Ratner 15:23:29 10/15/03 (0)
          • Re: Re: No mixer - Bob Ratner 18:36:41 10/14/03 (0)
  • Re: I am going to make Direct Drive a reality for SL Owners... - Bob Ratner 11:52:27 10/14/03 (1)
    • Thanks Bob, How about.... - Matt Rogers 13:54:33 10/14/03 (0)
• Get off your Backsides and do it. (pic) - Roy 14:43:01 10/12/03 (12)
  • Re: Get off your Backsides and do it. (url) - kelley pace 15:43:59 10/13/03 (4)
    • Re: Mills - Matt Rogers 16:15:36 10/13/03 (3)
      • Re: Re: Mills - kelley pace 22:59:37 10/13/03 (2)
        • Re: Mills in parallel - Matt Rogers 10:46:29 10/14/03 (1)
          • Re: Re: Mills in parallel (url) - kelley pace 11:43:57 10/14/03 (0)
  • compared to what? - rhyno 19:00:08 10/12/03 (1)
    • Re: compared to what? - Roy 00:56:03 10/13/03 (0)
  • Yeah! I am not "Mad Rogers" - Matt Rogers 16:10:15 10/12/03 (3)
    • Re: A few answers - Roy 09:13:45 10/13/03 (2)
      • Re: Ohmite Inductance - Matt Rogers 14:19:51 10/13/03 (1)
        • Re: Re: Ohmite Inductance - Roy 15:26:07 10/13/03 (0)
  • Someone please summarize the resistor issue - David M. 14:56:57 10/12/03 (0)
• Direct Drive Amp - Need Info - Matt 06:55:35 10/12/03 (1)
  • Re: Direct Drive Amp - Need Info - Bob Ratner 09:21:07 10/12/03 (0)
• ICW caps - any experience - rhyno 19:09:52 10/11/03 (5)
  • Not sure, but... - Lew 10:27:15 10/14/03 (0)
  • Re: ICW caps - some experience - Bob Ratner 21:05:36 10/11/03 (3)
    • Re: Re: ICW caps - some experience - francisco 05:31:21 10/12/03 (2)
      • Re: Re: Re: ICW caps - some experience - Bob Ratner 09:35:35 10/12/03 (1)
        • Capacitor esr meters (url) - Al Sekela 10:06:23 10/12/03 (0)
• Shipping help? - Mark K. 12:02:34 10/09/03 (2)
  • Re: Shipping help? - Brian Walsh 15:11:04 10/09/03 (0)
  • Re: Shipping help? Large Bubble Wrap..... - Bob Ratner 12:49:43 10/09/03 (0)
• Pristine follow-up - Mark K. 10:03:51 10/08/03 (6)
  • Re: Pristine follow-up - Mark K. 17:18:31 10/08/03 (0)
  • Re: Pristine follow-up - Tim Thomas 13:00:50 10/08/03 (0)
  • Re: Pristine follow-up - Duke 12:59:41 10/08/03 (0)
  • Dear Fellow Pristine User - Matt Rogers 12:20:56 10/08/03 (0)
  • Pristine follow-up If it ain't broke...Yada - Yada -Yada - Bob Ratner 11:42:35 10/08/03 (0)
  • Re: Pristine follow-up - Brian Walsh 10:47:26 10/08/03 (0)
• Two ways to Bi - Amp - Bob Ratner 04:12:09 10/07/03 (0)
• Where did all my power go? - Bob Ratner 19:47:24 10/03/03 (1)
  • Gone to young girls everyone.... - Matt Rogers 18:03:08 10/06/03 (0)
• Calling Roy....Calling Roy....Re X-Over - Matt Rogers 05:53:44 10/03/03 (18)
  • Re:Crossover answers - Roy 14:55:31 10/03/03 (17)
    • Re: Vishay 1000 Watt? - Matt 01:57:09 10/04/03 (16)
      • Re: Re: Vishay 1000 Watt? - Lew 07:49:47 10/07/03 (5)
        • Paralleling Caps - Matt Rogers 09:34:32 10/07/03 (4)
          • Read what you just quoted, please. - Lew 11:00:14 10/07/03 (3)
            • Don't just read what you want to read, please...Lew... - Matt Rogers 11:47:13 10/07/03 (2)
              • Re: Don't just read what you want to read, please...Lew... - Lew 12:49:40 10/07/03 (1)
                • Why are crossover caps choices so critical...?. - Bob Ratner 16:52:12 10/07/03 (0)
      • Re: Re:Here is some Info (url) - Roy 12:35:20 10/04/03 (9)
        • Re: Re: Re:Here is some Info - Francisco 14:30:08 10/05/03 (8)
          • Re: Crack the nut another way. - Roy 14:46:21 10/06/03 (7)
            • With L or no L - Matt Rogers 17:07:08 10/06/03 (4)
              • Re:no L - Roy 04:46:56 10/08/03 (3)
                • Re: Re:no L ...Values of "C" & "R" - Bob Ratner 08:09:55 10/08/03 (2)
                  • Re: Re: Re:Don’t forget - Roy 09:50:04 10/08/03 (1)
                    • Re: Re: Re: Re:Don’t forget - Bob Ratner 11:32:00 10/08/03 (0)
            • Re: Re: Crack the nut a third ,another way. - Bob Ratner 15:46:39 10/06/03 (1)
              • Re: Re: Re: Crack the nut a third ,another way. - Roy 16:49:58 10/06/03 (0)
• Will M1 Panels work with my Pristines' back plates? - Matt Rogers 17:19:45 10/01/03 (20)
  • Re: Will M1 Panels work with my Pristines' back plates? - Tim Thomas 21:23:00 10/03/03 (14)
    • Mounting panels.... - Matt Rogers 01:02:41 10/07/03 (13)
      • Re: Mounting panels.... - Tim Thomas 11:06:16 10/07/03 (12)
        • Re: Re: Mounting panels.... - Lew 10:53:55 10/08/03 (11)
          • Here are a few thoughts - Roy 14:47:33 10/08/03 (1)
            • Sorry, posted the above in the wrong place (nt) - Roy 14:54:31 10/08/03 (0)
          • Good Positive Post Lew (nt) - Matt Rogers 11:52:57 10/08/03 (0)
          • Pristines - Lew 10:59:41 10/08/03 (7)
            • Re: Pristines RESONATE FRAMES - Bob Ratner 12:00:19 10/08/03 (6)
              • Here are a few thoughts - Roy 14:51:34 10/08/03 (5)
                • M1s - Lew 06:32:00 10/09/03 (4)
                  • Re:Concrete Floors - Roy 07:48:32 10/09/03 (3)
                    • Re: Re:Concrete Floors - Lew 13:18:48 10/09/03 (2)
                      • Re: Re: Re:Concrete Floors - Roy 14:09:56 10/09/03 (1)
                        • Re: Re: Re: Re:Concrete Floors - Lew 14:19:10 10/10/03 (0)
  • Brian, I believe that we have SLOG because SL is ..... - Matt Rogers 16:54:41 10/02/03 (2)
    • Just - Brian Walsh 23:18:58 10/02/03 (1)
      • Jeez. Don't get too serious with me.... - Matt Rogers 05:22:00 10/03/03 (0)
  • Re: Will M1 Panels work with my Pristines' back plates? - Brian Walsh 20:10:33 10/01/03 (0)
  • Re: Will M1 Panels work with my Pristines' back plates? - Brian Walsh 20:05:14 10/01/03 (0)
• Pristine vs. A2Xa? - Mark K. 11:44:43 10/01/03 (4)
  • Re: Pristine vs. A2Xa? - Mark K. 13:04:10 10/02/03 (0)
  • Re: Pristine vs. A2Xa? - Tim Thomas 19:45:06 10/01/03 (0)
  • Re: Pristine vs. A2Xa? - Duke 12:34:29 10/01/03 (1)
    • Re: Re: Pristine vs. A2Xa? - Bob Ratner 17:17:15 10/01/03 (0)
• Resistor Dissipation - Mike Beck 19:18:52 09/30/03 (4)
  • Question fro you Mike... - Matt Rogers 18:38:35 10/06/03 (3)
    • Two way to Bi - Amp - Bob Ratner 20:29:42 10/06/03 (2)
      • Re: Two way to Bi - Amp - Matt Rogers 23:45:54 10/06/03 (1)
        • Re: Re: Two ways to Bi - Amp - Bob Ratner 04:07:13 10/07/03 (0)
• update to the backplate instructions--U2, A3, Pristine - rhyno 09:26:02 09/28/03 (41)
  • actually, i think i got it. please confirm!?! - rhyno 19:04:20 09/28/03 (2)
    • done! - rhyno 10:02:42 09/30/03 (0)
    • actually,i think i got it.please confirm! R1+R2+R3+R4= RT - Bob Ratner 21:40:06 09/28/03 (0)
  • Mills Resistors - Matt Rogers 15:14:27 09/28/03 (0)
  • Re: Don't sell them - Roy 14:38:29 09/28/03 (36)
    • I don't get it.. - Lew 10:10:49 09/30/03 (35)
      • Thermal coefficient of resistance - Al Sekela 14:05:44 09/30/03 (8)
        • Re: Thermal coefficient of resistance - Francisco 14:47:57 10/03/03 (0)
        • Hope my 2 cents worth - may be useful to some.... - Matt Rogers 17:31:27 09/30/03 (5)
          • error - should be 24 uF / 12R new configuration - Matt Rogers 17:45:03 09/30/03 (4)
            • Re: error - should be 24 uF / 12R new configuration - Roy 09:59:26 10/01/03 (3)
              • Go for the 500 watt resistor...You won't regret it. - Matt Rogers 11:25:56 10/01/03 (2)
                • Re: Go for the 500 watt resistor...You won't regret it. - Lew 13:13:27 10/01/03 (0)
                • Re: New boards - Roy 13:09:31 10/01/03 (0)
        • Re: Thermal coefficient of resistance - Roy 15:58:00 09/30/03 (0)
      • Re: I don't get it.. - Roy 13:38:05 09/30/03 (21)
        • Re: Re: I don't get it.. - Lew 08:22:28 10/01/03 (20)
          • Re: Re: Re: I don't get it.. - Roy 14:59:56 10/01/03 (0)
          • I am just a dumb Doer... here goes... - Matt Rogers 12:07:19 10/01/03 (0)
          • Thermal stability of Mills MRB-12 resistors - Lew 11:00:10 10/01/03 (17)
            • Interference versus noise - Al Sekela 07:53:14 10/02/03 (1)
              • Re: Interference versus noise mattress V/S nylon - Bob Ratner 09:24:43 10/02/03 (0)
            • Re: Thermal stability of Mills MRB-12 resistors - Matt Rogers 12:15:44 10/01/03 (14)
              • Jeez! I love jazz, hot AND cool... - Lew 12:56:35 10/01/03 (13)
                • How long is a piece of string? - Matt Rogers 14:39:49 10/01/03 (12)
                  • Re: How long is a piece of string? - Lew 08:06:10 10/02/03 (10)
                    • Re: Re: To "L" or not to "L" - Roy 04:09:57 10/03/03 (5)
                      • Re: Re: Re: Please disregard - Roy 01:40:59 10/06/03 (0)
                      • Dear William Shakespear... - Matt Rogers 05:08:06 10/03/03 (3)
                        • Re: Dear William Shakespear... - Roy 12:56:28 10/03/03 (0)
                        • Kevin Covi? - Lew 07:52:40 10/03/03 (1)
                          • correction - Lew 10:20:22 10/03/03 (0)
                    • We are now resorting to "Juice" theory, are we? - Matt Rogers 16:06:08 10/02/03 (2)
                      • Sorry... - Lew 08:15:04 10/03/03 (0)
                      • The Z mod? - Matt Rogers 16:44:58 10/02/03 (0)
                    • Re: Re: How long is a piece of hot string? - Bob Ratner 09:17:30 10/02/03 (0)
                  • Heat in the Box...Heat dispersed outside of the box...? - Bob Ratner 17:35:03 10/01/03 (0)
      • Re: I don't get it.. - Bob Ratner 12:05:30 09/30/03 (3)
        • Re: Re: I don't get it.. - Lew 12:28:58 09/30/03 (2)
          • That should be "f-i-n-i-c-k-y-ness" (nt) - Lew 12:31:01 09/30/03 (1)
            • Re: That should be "f-i-n-i-c-k-y-ness" (o) - Bob Ratner 15:41:37 09/30/03 (0)
• A-3 in Hong Kong - update - Kenny 09:53:53 09/27/03 (4)
  • Hong Kong - update: Treble Control By-Pass & Efficiency - Bob Ratner 23:41:35 09/27/03 (0)
  • Re: A-3 in Hong Kong - update - Brian Walsh 13:05:23 09/27/03 (2)
    • Thanks Brian...but - Kenny 17:17:09 09/27/03 (1)
      • Re: Thanks Brian...but - Brian Walsh 00:16:54 09/28/03 (0)
• Longectivity - Rick Knebel 15:58:53 09/24/03 (5)
  • Re: Longectivity - Rick 22:23:21 09/25/03 (0)
  • Re: Longectivity - Harry Hasbun 18:47:58 09/25/03 (0)
  • Re: Longectivity - Brian Walsh 17:43:49 09/24/03 (2)
    • Re: Re: Longectivity - Duke 20:32:34 09/24/03 (1)
      • Re: Longectivity & Perfect Sound for Perfect Ears - Bob Ratner 23:44:15 09/24/03 (0)
• I want small speaker - jame 08:57:38 09/24/03 (3)
  • Re: I want small speaker ,with the big sound...... - Bob Ratner 06:36:54 09/25/03 (0)
  • Tall order - Duke 23:46:56 09/24/03 (0)
  • Smaller speakers - Al Sekela 11:25:02 09/24/03 (0)
• SLOG.....ZZZZZZZzzzzz - Bob Ratner 15:17:07 09/22/03 (3)
  • Re: SLOG.....ZZZZZZZzzzzz - Rick 16:08:43 09/23/03 (2)
    • Re: Re: SLOG.....ZZZZZZZzzzzz - Travis 20:42:32 09/23/03 (1)
      • Flog~On~ SLOG.....ZZZZZZZzzzzz - Bob Ratner 23:26:19 09/23/03 (0)
• Panel Restoration (url) - Roy 14:01:39 09/11/03 (7)
  • Re: Apologies - Roy 10:40:20 09/23/03 (2)
    • Re: Re: Apologies - Bob Ratner 17:32:25 09/23/03 (1)
      • Re: Re: Re: Apologies - Roy 01:26:11 09/24/03 (0)
  • Re: Panel Restoration - Francisco 05:10:44 09/13/03 (3)
    • Re: Re: Panel Restoration - Roy 07:10:55 09/14/03 (2)
      • Re: Re: Re: Panel Restoration .. Hot Glue..? - Bob Ratner 09:49:59 09/14/03 (1)
        • Re: Re: Re: Re: Panel Restoration .. Hot Glue..? - steve h 15:47:20 09/16/03 (0)
• Room Lenses (url) - Roy 13:38:57 09/08/03 (15)
  • Re: Room Lenses - Lew 06:55:30 09/09/03 (5)
    • Re: Re: Room Lenses (url) - Roy 13:16:46 09/09/03 (4)
      • Re: Re: Re: Acustica Applicata (url) - Roy 01:50:25 09/17/03 (0)
      • Janszen? - Lew 08:50:08 09/11/03 (2)
        • Re: Not Janszen – Module (url) - Roy 07:18:09 09/12/03 (0)
        • Re: Janszen? - Roy 13:49:49 09/11/03 (0)
  • Re: Room Lenses - Brian Walsh 14:32:31 09/08/03 (6)
    • Re: Re: Room Lenses and Re-build - Roy 16:03:57 09/08/03 (5)
      • Re-build - Lew 12:01:50 09/09/03 (3)
        • Re: Re-build - Roy 13:29:15 09/09/03 (2)
          • Re: Re: Re-build - Francisco 14:35:09 09/09/03 (1)
            • Re: Re: Re: Re-build - Roy 15:20:31 09/09/03 (0)
      • Re: Re: Re: Room Lenses and Re-build - Brian Walsh 22:08:00 09/08/03 (0)
  • Great post, Roy! - Al Sekela 14:08:36 09/08/03 (1)
    • Re: Great post, Roy! - Roy 15:42:08 09/08/03 (0)
• M1: Amplifiers - Mariano 19:36:46 09/01/03 (74)
  • Bi-amping question - mariano 09:40:20 09/04/03 (1)
    • Re: Bi-amping question - Duke 09:50:00 09/08/03 (0)
  • Re: M1: Amplifiers - Art Tedeschi 16:25:25 09/03/03 (4)
    • Thank you Art (nt) - Mariano 18:12:41 09/03/03 (3)
      • Re: Thank you Art (nt) The Pursuit of Perfection - Bob Ratner 19:21:40 09/03/03 (2)
        • Re: Re: Thank you Art (nt) The Pursuit of Perfection - Art Tedeschi 08:29:50 09/05/03 (1)
          • Re: Re: Re: Thank you Art (nt) The Pursuit of Perfection - Bob Ratner 08:46:26 09/05/03 (0)
  • Re: M1: Amplifiers - Lew 12:03:20 09/02/03 (66)
    • Re: Re: M1: Amplifiers - Bill Lamb 18:58:53 09/02/03 (28)
      • Re: Re: Re: M1: Amplifiers - Mariano 04:34:56 09/03/03 (1)
        • Re: Re: Re: Re: M1: Amplifiers - esldude 21:20:03 09/03/03 (0)
      • Re: Re: Re: M1: Amplifiers - esldude 20:40:22 09/02/03 (25)
        • Re: Re: Re: Re: M1: Amplifiers - Lew 07:28:47 09/03/03 (24)
          • Re: Re: Re: Re: Re: M1: Amplifiers - Bob Ratner 08:23:15 09/03/03 (23)
            • Re: Re: Re: Re: Re: Re: M1: Amplifiers - Travis 19:01:10 09/03/03 (22)
              • Re: Re: Re: Re: M1: Amplifiers, ZERO on ZERO - Bob Ratner 19:52:46 09/03/03 (21)
                • Re: Re: Re: Re: Re: M1: Amplifiers, ZERO on ZERO - Travis 10:25:53 09/05/03 (12)
                  • Re: Re: Re: Re: Re: Re: M1: Amplifiers, ZERO on ZERO - Bob Ratner 13:35:47 09/05/03 (11)
                    • As I suspected, you've never heard the Zero. - Travis 16:00:16 09/05/03 (10)
                      • Re: As I suspected, you've never heard the Zero. - Bob Ratner 19:12:33 09/05/03 (9)
                        • If audio engineers are so wonderful, why don't they - Travis 22:04:04 09/05/03 (8)
                          • If audio engineers are so wonderful, why don't they AGREE ? - Bob Ratner 23:41:04 09/05/03 (7)
                            • COOL IT. - Al Sekela 14:25:04 09/06/03 (6)
                              • Re: COOL IT. - Travis 19:34:03 09/06/03 (1)
                                • Re: Re: COOL IT. - Bob Ratner 20:04:01 09/06/03 (0)
                              • Re: COOL IT. - Bob Ratner 16:38:34 09/06/03 (3)
                                • DISRESPECT - Al Sekela 14:17:12 09/07/03 (2)
                                  • 2:NOT- DISRESPECT "ZERO" Distortion....Good Distortions.. - Bob Ratner 00:05:14 09/08/03 (0)
                                  • Re: No-DISRESPECT, Snake oil messenger only...? - Bob Ratner 22:57:14 09/07/03 (0)
                • Re: Re: Re: Re: Re: M1: Amplifiers, ZERO on ZERO - esldude 21:32:15 09/03/03 (7)
                  • Direct-drive - Lew 13:52:13 09/05/03 (5)
                    • Re: Direct-drive - Brian Walsh 22:25:14 09/06/03 (0)
                    • Re: Direct-drive - esldude 20:56:13 09/06/03 (2)
                      • Modifications - Bob Ringwell 21:10:37 09/06/03 (1)
                        • Re: Modifications (url) - Brian Walsh 21:58:18 09/06/03 (0)
                    • Re: Direct-drive Hi-Z Modification..? - Bob Ratner 14:15:37 09/05/03 (0)
                  • : M1: Amplifiers, ZERO To 200 miles an hour.... - Bob Ratner 23:55:40 09/03/03 (0)
    • Re: Re: M1: Amplifiers - mariano 12:36:04 09/02/03 (36)
      • The new factory 'hi-Z" circuitry... - Lew 13:19:07 09/02/03 (35)
        • Re: The new factory 'hi-Z" circuitry... - mariano 14:08:13 09/02/03 (34)
          • whoops... - Lew 15:09:53 09/02/03 (33)
            • Re: whoops. Tubes~Solid State~ Bi-Amp...Hurricane - Bob Ratner 16:14:41 09/02/03 (32)
              • Re: Re: whoops. Tubes~Solid State~ Bi-Amp...Hurricane - Lew 07:20:49 09/03/03 (4)
                • Re: Re: Re: whoops. Tubes~Solid State~Bi-Amp,OTC,Hurricane - Bob Ringwell 10:55:32 09/03/03 (3)
                  • yada - Lew 11:21:44 09/03/03 (2)
                    • Re: yada - mariano 13:12:56 09/03/03 (1)
                      • YMMV - Lew 14:48:46 09/03/03 (0)
              • Re: Re: whoops. Tubes~Solid State~ Bi-Amp...Hurricane - mariano 17:30:08 09/02/03 (26)
                • Re: Re: Re: whoops. Tubes~Solid State~ Bi-Amp...Hurricane - Bob Ratner 19:24:41 09/02/03 (25)
                  • Re: Re: Re: Re: whoops. Tubes~Solid State~ Bi-Amp...Hurrican - Brian Walsh 22:51:09 09/03/03 (18)
                    • Re: Re: Re: Re: Re: Sound Lab Brand Of Amplifier..? - Bob Ratner 23:11:36 09/03/03 (17)
                      • Re: Re: Re: Re: Re: Re: Sound Lab Brand Of Amplifier..? - Brian Walsh 11:47:11 09/04/03 (14)
                        • Re: Re: Re: Re: Re: Re: Re: Sound Lab Brand Of Amplifier..? - Bob Ratner 15:06:24 09/04/03 (13)
                          • Re: Re: Re: Re: Re: Re: Re: Re: Sound Lab Brand Of Amplifier - Brian Walsh 17:07:24 09/04/03 (12)
                      • I understand they own... - mariano 05:41:38 09/04/03 (1)
                        • Re: I understand they own... - Bob Ratner 08:28:17 09/04/03 (0)
                  • Re: Re: Re: Re: whoops. Tubes~Solid State~ Bi-Amp...Hurricane - esldude 21:42:43 09/03/03 (1)
                    • Re: Re: Re: Re: Re: whoops. Tubes~Solid State CROWN - Bob Ratner 23:32:01 09/03/03 (0)
                  • Re: Re: Re: Re: whoops. Tubes~Solid State~ Bi-Amp...Hurrican - Mariano 21:17:46 09/02/03 (3)
                    • Re: Re: Re: Re: Re: whoops. Tubes~Solid State~ Bi-Amp...Hurrican - Bob Ratner 22:00:31 09/02/03 (2)
                      • Re: Re: Re: Re: Re: Re: whoops. Tubes~Solid State~ Bi-Amp... - Mariano 04:31:23 09/03/03 (1)
                        • Re: Re: Re: Re: Re: Re: Re: whoops. Tubes~Solid State~ Bi-Amp... - Bob Ratner 11:20:48 09/03/03 (0)
• RIAA accuracy ? - Bob Ratner 23:31:01 08/28/03 (9)
  • Re: RIAA accuracy ? - goldenthal 18:04:57 08/29/03 (8)
    • Re: Re: RIAA accuracy ? - Bob Ratner 19:20:42 08/29/03 (7)
      • Re: Re: Re: RIAA accuracy ? - goldenthal 15:28:51 08/30/03 (6)
        • Re: Re: Re: Re: RIAA accuracy ? - Brian Walsh 05:16:07 08/31/03 (4)
          • Re: Re: Re: Re: Re: RIAA accuracy ? - goldenthal 17:21:29 08/31/03 (0)
          • Re: Re: Re: Re: Re: RIAA accuracy ? - Bob Ratner 10:08:41 08/31/03 (2)
            • Re: Re: Re: Re: Re: Re: RIAA accuracy ? - goldenthal 17:24:12 08/31/03 (1)
              • Re: Re: Re : Marantz 7 RIAA accuracy ? - Bob Ratner 23:02:42 08/31/03 (0)
        • Re: Re: Re: Re: RIAA accuracy ? Wine recommendations ? - Bob Ratner 16:12:44 08/30/03 (0)
• Any Word from the Factory? - Marvin Adeff 08:37:48 08/28/03 (3)
  • Re: Any Word from the Factory? - Marvin 12:59:54 08/28/03 (0)
  • Re: Any Word from the Factory? - Bob Ratner 10:27:31 08/28/03 (0)
  • Here is the new information - Brian Walsh 09:07:36 08/28/03 (0)
• Center channel for soundlab system. - Gary Rotter 14:05:31 08/27/03 (2)
  • Re: Center channel for soundlab system. - Bob Ratner 16:05:55 08/27/03 (0)
  • Re: Center channel for soundlab system. - Brian Walsh 14:34:05 08/27/03 (0)
• 4 days until soundlabs - rhyno 17:21:35 08/26/03 (8)
  • Re: 4 days until soundlabs - Travis 20:16:06 08/26/03 (3)
    • shall i strap them on top the corvette? - rhyno 05:49:18 08/27/03 (2)
      • Re: shall i strap them on top the corvette? - Travis 16:15:07 08/27/03 (0)
      • shall i strap them on top the corvette & Shall I play 1812 - Bob Ratner 07:31:57 08/27/03 (0)
  • Re: 4 days until soundlabs - Bob Ratner 18:39:40 08/26/03 (3)
    • The amp works fine with the U-2s as heard - rcrump 09:11:23 08/31/03 (2)
      • Re: The amp works fine with the U-2s as heard - Bob Ratner 10:33:58 08/31/03 (1)
        • Re: Re: The amp works fine with the U-2s as heard - rhyno 11:55:51 08/31/03 (0)
• powercord for M1 - Johnson 09:34:57 08/22/03 (36)
  • Re: powercord for M1 - Art Tedeschi 16:18:03 08/25/03 (17)
    • Re: Re: powercord for M1 - Brian Walsh 16:56:49 08/25/03 (16)
      • Re: Re: Re: powercord for M1 - Art Tedeschi 18:43:07 08/25/03 (14)
        • Power cords for audio equipment. - Al Sekela 19:05:03 08/25/03 (1)
          • Re: Power cords for audio equipment. SCIENCE - Bob Ratner 23:57:22 08/25/03 (0)
        • Re: Re: Re: Re: powercord for M1 - Brian Walsh 18:54:46 08/25/03 (11)
          • Re: Re: Re: Re: Re: powercord for M1 - Art Tedeschi 19:28:44 08/25/03 (10)
            • Re: Re: Re: Re: Re: Re: powercord for M1 - Brian Walsh 21:07:16 08/25/03 (9)
              • Re: Re: Re: Re: Re: Re: Re: powercord for M1 - Bob Ratner 00:01:47 08/26/03 (8)
                • Re: Re: Re: Re: Re: Re: Re: Re: powercord for M1 - Brian Walsh 07:57:24 08/26/03 (7)
                  • Re: Re: Re: Re: Re: powercord for M1 "A"/ "B" Testing - Bob Ratner 10:42:22 08/26/03 (6)
                    • Re: Re: Re: Re: Re: Re: powercord for M1 "A"/ "B" Testing - mariano 13:04:25 08/26/03 (1)
                      • Re: Re: Re: Re: Re: Re: Re: powercord for M1 "A"/ "B" Testing - Bob Ratner 14:35:23 08/26/03 (0)
                    • Re: Re: Re: Re: Re: Re: powercord for M1 "A"/ "B" Testing - Brian Walsh 10:56:04 08/26/03 (3)
                      • Re: Re: Re: Re: Re: Powercord-Fool for M1 "A"/ "B" Testing - Bob Ratner 11:09:03 08/26/03 (2)
                        • Re: Re: Re: Re: Re: Re: Powercord-Fool for M1 "A"/ "B" Tes - Brian Walsh 12:58:34 08/26/03 (1)
                          • Re: Re: Powercord-Fool 4 TRUTH... for M1 "A"/ "B" Tes - Bob Ratner 14:56:55 08/26/03 (0)
      • Re: Re: Re: powercord for M1 - Bob Ratner 18:14:20 08/25/03 (0)
  • Re: powercord for M1 - Rick 00:40:31 08/24/03 (15)
    • Re: Re: powercord for M1 - Bob Ratner 07:35:55 08/24/03 (14)
      • Re: Re: Re: powercord for M1 - Brian Walsh 09:38:45 08/24/03 (13)
        • I have to agree with Brian... - Lew 07:09:45 08/25/03 (8)
          • Re: I have to agree with Brian... - Bob Ratner 12:02:36 08/25/03 (5)
            • Re: Re: I have to agree with Brian... - Lew 12:31:48 08/25/03 (4)
              • Re: Re: Re: I have to gree with Brian... - Bob Ratner 14:20:39 08/25/03 (3)
                • Maybe you are correct.., - Lew 14:40:22 08/25/03 (2)
                  • Re: Maybe you are correct.., - Bob Ratner 18:25:11 08/25/03 (1)
                    • Re: Re: Maybe you are dis - connected.., - Bob Ratner 00:14:51 08/26/03 (0)
          • Re: I have to agree with Brian... - Larry Smith 10:26:21 08/25/03 (1)
            • Your point? - Lew 10:28:47 08/25/03 (0)
        • Re: Re: Re: Re: powercord for M1 - Bob Ratner 12:11:30 08/24/03 (3)
          • Re: Re: Re: Re: Re: powercord for M1 - Brian Walsh 13:20:08 08/24/03 (2)
            • Re: Re: Re: Re: Re: Re: powercord for M1 - Rick 21:49:33 08/24/03 (1)
              • Re: Re: Re: Re: Re: Re: Re: powercord for M1 - Bob Ratner 23:21:30 08/24/03 (0)
  • Re: powercord for M1 - Larry Smith 17:02:16 08/22/03 (0)
  • Re: powercord for M1 - Brian Walsh 10:35:39 08/22/03 (0)
• A-3 in Hong Kong - Kenny 21:56:17 08/21/03 (13)
  • Hello Duke; do I need a pre-amp ?? - Kenny 07:57:23 08/23/03 (3)
    • Re: Hello Duke; do I need a pre-amp ?? - Yves 06:32:31 08/27/03 (0)
    • Re: Hello Duke; do I need a pre-amp ?? - Bob Ratner 17:04:36 08/23/03 (0)
    • Re: Hello Duke; do I need a pre-amp ?? - Duke 08:04:58 08/23/03 (0)
  • Re: A-3 in Hong Kong (url) - Duke 09:52:55 08/22/03 (7)
    • Re: Re: A-3 in Hong Kong - Linda Weise 20:16:18 08/22/03 (4)
      • "every other speaker.." - Lew 07:38:23 08/25/03 (0)
      • Impedance of electrostats - Duke 12:16:04 08/23/03 (2)
        • Re: Impedance of electrostats - Al Sekela 17:22:21 08/23/03 (1)
          • Re: Re: Impedance of electrostats - Bob Ratner 18:25:39 08/23/03 (0)
    • Mine is an Apogee Duetta Signature ... - Kenny 10:13:34 08/22/03 (1)
      • To Kenny - Yves 06:24:57 08/27/03 (0)
  • Re: A-3 in Hong Kong - Brian Walsh 23:03:42 08/21/03 (0)
• Amps for SL Aura's? (url) - Highland 10:01:30 08/21/03 (2)
  • Re: Amps for SL Aura's? - Esldude 18:49:21 08/30/03 (0)
  • Re: Amps for SL Aura's? - Bob Ratner 17:59:07 08/21/03 (0)
• Spike Thread Size? & Duke kudos! - Mike Bieda 09:51:45 08/20/03 (2)
  • Re: Spike Thread Size? & Duke kudos! - Duke 10:39:36 08/20/03 (1)
    • Re: Re: Spike Thread Size? & Duke kudos! - Brian Walsh 11:49:51 08/20/03 (0)
• 2pairs of M3 - King M.Luther 23:02:05 08/18/03 (15)
  • Some M-1 vs 2xM-3 considerations - Duke 10:19:27 08/20/03 (8)
    • Re: Some M-1 vs 2xM-3 considerations - Lew 06:46:56 08/21/03 (4)
      • Re: Re: Some M-1 vs 2xM-3 considerations - Brian Walsh 08:47:21 08/21/03 (2)
        • Re: Re: Re: Some M-1 vs 2xM-3 considerations - Larry Smith 09:01:39 08/21/03 (1)
          • Re: Re: Re: Re: Some M-1 vs 2xM-3 considerations - Brian Walsh 11:28:57 08/21/03 (0)
      • Re: Re: Some M-1 vs 2xM-3 considerations Hang - Fly - Larry Smith 08:26:19 08/21/03 (0)
    • Re: Some M-1 vs 2xM-3 considerations - Bob Ratner 14:25:24 08/20/03 (2)
      • Re: Some M-1 vs 2xM-3 considerations - Duke 09:42:20 08/21/03 (1)
        • Re: Re: Some M-1 vs 2xM-3 considerations ESL FOCUS - Bob Ratner 21:00:35 08/23/03 (0)
  • Re: 2pairs of M3 Same price... - Bob Ratner 23:52:27 08/18/03 (2)
    • Re: Re: 2pairs of M3 Same price... - Brian Walsh 08:28:40 08/19/03 (1)
      • Re: Re: Re: 2pairs of M3.. More 4 Same price... - William Pass 10:59:45 08/19/03 (0)
  • Re: 2pairs of M3 - Brian Walsh 23:26:41 08/18/03 (2)
    • Re: Re: 2pairs of vertical M3 tall stools..? - William Pass 02:11:34 08/19/03 (1)
      • Re: Re: Re: 2pairs of vertical M3 tall stools..? - Brian Walsh 08:20:12 08/19/03 (0)
• how to clean M1 planel? - Linda J. 01:14:08 08/17/03 (7)
  • how to clean M1 planel? Very soft camel hair brush... - Bob Ratner 22:22:16 08/17/03 (6)
    • Re: how to clean M1 planel? - Brian Walsh 07:09:38 08/18/03 (4)
      • Re: Re: how to clean M1 planel? - John Vogt 09:48:34 08/18/03 (1)
        • Re: Re: Re: how to clean M1 planel? - Brian Walsh 10:47:56 08/18/03 (0)
      • Re: Re: how to clean M1 planel? - Bob Ratner 07:35:55 08/18/03 (1)
        • : How to clean M1 planel?..Polarity of dust..? - Bob Ratner 19:49:48 08/18/03 (0)
    • Re: how to clean M1 planel? Very soft camel hair brush... - Linda J. 23:24:08 08/17/03 (0)
• SL owners in Houston? - Brian Walsh 11:27:29 08/13/03 (0)
• rule of thumb - Johnson 08:37:17 08/12/03 (2)
  • There's a simpler explanation... - Doctor OTL 22:27:28 08/12/03 (0)
  • Re: rule of thumb: Shorter Oxford English Dictionary - Al Sekela 18:53:49 08/12/03 (0)
• Soundlabs for Home Theater - Harry Hasbun 14:45:59 08/08/03 (3)
  • Re: Soundlabs for Home Theater - marcos augusto 00:34:48 08/09/03 (0)
  • Re: Soundlabs for Home Theater - Rick 00:13:59 08/09/03 (1)
    • Re: Re: Soundlabs for Home Theater - Harry Hasbun 13:39:27 08/10/03 (0)
• Not to be missed --JG Holt's A-3 review in Stereophile (url) - Mariano 10:17:02 08/06/03 (10)
  • Re: Not to be missed --JG Holt's A-3 review in Stereophile - Art Tedeschi 16:27:55 08/06/03 (9)
    • Re: Re: Not to be missed --JG Holt's A-3 review in Stereophile - Bob Ratner 13:05:16 08/08/03 (8)
      • Re: Re: Re: Not to be missed --JG Holt's A-3 review in Stereophile - Art Tedeschi 14:48:10 08/08/03 (0)
      • Re: Re: Re: Not to be missed --JG Holt's A-3 review in Stereophile - marcos augusto 14:46:50 08/08/03 (6)
        • Re: Re: Re: Re: Not to be missed --JG Holt's A-3 review in Stereophile - Bob Ratner 22:32:28 08/08/03 (4)
          • Re: Re: Re: Re: Re: Not to be missed --JG Holt's A-3 review in Stereophile - marcos augusto 23:59:07 08/08/03 (3)
            • Re: Re: Re: Re: Re: Re: Not to be missed --JG Holt's A-3 review in Stereophile - Bob Ratner 10:17:14 08/09/03 (2)
              • Subwoofer integration - Al Sekela 10:34:59 08/10/03 (1)
                • Re: Subwoofer integration - Bob Ratner 14:23:21 08/10/03 (0)
        • Re: Re: Re: Re: Not to be missed --JG Holt's A-3 review in Stereophile - Bob Ratner 21:27:52 08/08/03 (0)
• ARC EC22 - Francisco 17:36:00 08/03/03 (8)
  • Re: ARC EC22 Active Crossover - Bob Ratner 22:17:42 08/03/03 (0)
  • Re: ARC EC22 (final correction - sorry about first two) (url) - Brian Walsh 22:06:27 08/03/03 (0)
  • Re: ARC EC22 (corrected post) (pic) - Brian Walsh 22:05:33 08/03/03 (0)
  • Re: ARC EC22 - Brian Walsh 22:04:49 08/03/03 (1)
    • Re: Re: ARC EC22 - Michael 14:37:48 08/04/03 (0)
  • Re: ARC EC22 - Bob Ratner 21:45:25 08/03/03 (2)
    • Re: Re: ARC EC22 - Lew 06:35:06 08/04/03 (1)
      • I goofed! - Lew 07:23:34 08/04/03 (0)
• SoundLab vs. Martin Logan - Yuan 17:19:13 08/02/03 (7)
  • Re: SoundLab vs. Martin Logan - Bill Lamb 22:49:45 08/06/03 (0)
  • Re: SoundLab vs. Martin Logan - Bob Ratner 09:21:25 08/06/03 (0)
  • Re: SoundLab vs. Martin Logan - Lew 06:48:11 08/06/03 (0)
  • Re: SoundLab vs. Martin Logan - Duke 17:51:20 08/05/03 (1)
    • Take him up on that offer! - Harry Hasbun 13:38:57 08/07/03 (0)
  • Re: SoundLab vs. Martin Logan - Al Sekela 10:56:17 08/03/03 (0)
  • SoundLab vs. Martin Logan..Inner beauty get's it every time - Bob Ratner 19:02:24 08/02/03 (0)
• ASL HURRICANE 200 DT MONOS (url) - Mariano Pacheco 08:29:38 08/01/03 (10)
  • Re: ASL HURRICANE 200 DT MONOS - Bob Ratner 09:53:56 08/01/03 (9)
    • "Eight KT88's can actually produce 600 watts per amplifier" - Travis 14:40:09 08/01/03 (3)
      • "Eight KT88's can actually produce 400 watts per amplifier" - Bob Ratner 20:54:52 08/07/03 (2)
        • Not to put too fine a point on it but... - Travis 18:20:08 08/12/03 (1)
          • Re: Not to put too fine a point on it but... - Bob Ratner 01:42:27 08/14/03 (0)
    • iTube (url) - Mariano Pacheco 10:18:21 08/01/03 (4)
      • Re: iTube - Bob Ratner 12:28:17 08/01/03 (3)
        • Re: Re: iTube - Mariano Pacheco 13:43:42 08/01/03 (2)
          • Re: iTube... Eros Mk III crossover Amplifier: $3750 or - Bob Ringwell 14:13:35 08/01/03 (1)
            • Re: Re: iTube... Eros Mk III crossover Amplifier: $3750 or - Mark K 15:09:09 08/01/03 (0)
• Sound Lab SoundLab R-1 on e-bay - Bob Ratner 22:22:27 07/31/03 (2)
  • Re: Sound Lab SoundLab R-1 on e-bay - Brian Walsh 22:57:03 07/31/03 (1)
    • Re: Re: Sound Lab SoundLab R-1 on e-bay - Bob Ratner 10:03:04 08/01/03 (0)
• SETs on Soundlabs - Adrian Lee 23:48:18 07/30/03 (1)
  • Re: SETs on Soundlabs - Lew 08:26:34 07/31/03 (0)
• A2Xa vs. Pristines... - Mark K 16:21:24 07/26/03 (3)
  • Re: A2Xa vs. Pristines... - Steve H 16:38:09 08/05/03 (0)
  • Re: A2Xa vs. Pristines...Go to the Source - Bob Ratner 04:28:43 07/30/03 (1)
    • Re: Re: A2Xa vs. Pristines...Go to the Source - Mark K 14:57:22 08/01/03 (0)
• M1or2or3 - Johnson 06:16:33 07/26/03 (5)
  • A few words of comparison - Duke 21:10:20 07/26/03 (0)
  • Re: M1or2or3 - Brian Walsh 12:42:12 07/26/03 (0)
  • Re: M1or2or3 - Bob Ratner 09:36:50 07/26/03 (0)
  • Re: M1or2or3 - Art Tedeschi 06:27:23 07/26/03 (1)
    • Re: Re: M1or2or3 - johnson 23:36:04 07/28/03 (0)
• Bi-Amping Full-Range ESL Speakers - Bob Ratner 08:50:13 07/16/03 (20)
  • Not recommended? - Lew 07:44:40 07/22/03 (17)
    • Re: Not recommended? - Bob Ratner 16:51:19 07/22/03 (16)
      • Re: Re: Not recommended? - Travis 19:08:55 07/23/03 (6)
        • Recording Studio "egregious crap" - Bob Ratner 04:48:50 07/24/03 (5)
          • Hallelujah!! - Travis 18:21:15 07/24/03 (0)
      • Re: Re: Not recommended? - Lew 07:21:25 07/23/03 (8)
        • Re: Re: Re: Not recommended? - Bob Ratner 18:45:06 07/24/03 (0)
        • Re: Re: Re: Not recommended? - Bob Ratner 18:22:23 07/23/03 (6)
          • Re: Re: Re: Re: Not recommended? - Lew 07:33:43 07/24/03 (5)
            • Re: Re: Re: Re: Re: Not recommended? - Mike 11:54:36 07/24/03 (4)
              • Re: Re: Re: Re: Re: Re: Not recommended? - Bob Ratner 23:58:12 07/29/03 (0)
              • Thanks! - Lew 07:41:06 07/28/03 (