Posted by the dude on October 22, 2005 at 14:15:10:
I am beginning to experience some problem with the other A3 panel. I wasn't able to notice it until I got the other panel back from the factory. I can hear some sort of static clicking. it is almost like a clicking sound or something and it varies in speed depending on how I adjust the bias on this panel. I set the bias on this panel at 3 o'clock. it may a bit high, but I don't know. I think both should be on 12 o'clock. so this may translate into future repair for this panel? I can't see any sparkles going off as I did on the other panel before I repaired it. I can't see any rips or tears on the mylar either and I can pinpoint where the clicking sound is coming from. it is from one particular panel close to the center of the speaker. but upon closer inspection from both sides of panel, I can't see anything wrong with it. could be an insulation problem? I will give soundlab a call on monday. meanwhile, I had planned a bbq at my house for porcupine tree fans as we are going to the shows this weekend....hope this panel doesn't die on me this weekend , oh well....