Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Sound Lab recommendations for a small room #639
    hifibuff
    Participant

      Hi Russellgnv,
      I also had a room with similar dimensions. I use A3 non PX. They worked very very well in that room with the gear I had.

      in reply to: Schematics for AU90 transformer modification #603
      hifibuff
      Participant

        No problems. Since my A3 are from 1989 the backplates are small. I had to remove the hi frequency pot (it was bypassed with a resister but left if to fill the hole), mount the switch PS vertically and use spacers under the mixer to clear hardware on the backplate.

        in reply to: Schematics for AU90 transformer modification #596
        hifibuff
        Participant

          I found this from my dusty files. These were a tight fit in my A3 backplates.

          Attachments:
          You must be logged in to view attached files.
          in reply to: New speakers in the house #344
          hifibuff
          Participant

            Atama Sphere MA-1 work wonderful with my A3 and Magnan cables. My updated backplates have new mixers, AU tranformner running no x-over.

          Error on visit counts WordPress › Error